product
Pumps

ETLB-S

Vertical sump pump

Overview

Nominal size:
DN 15-80
Drive rating:
0.37–7.5 kW
Flow rate (Q):
up to 104 m³/h
Head (H):
up to 36 m
Sealing:
EPDM | FPM
Connection:
socket | spigot | flange
  • vertical single-stage immersion pump in block design
  • equipped with a freewheeling shaft for protection against dry running
  • broad range of applications through diverse construction and material combinations
  • excellent operating reliability even under extreme operating conditions
  • high availability due to simple modular design in the immersion depths 275/295, 375/395, 475/495
  • special mounting plate and connection designs available on request
  • optional design with dry set-up
  • Impeller fastened on the motor shaft independent of the rotational direction
  • Screwless plastic spiral housing made of PP or PVDF
  • Three-phase motor manufactured by Stübbe
  • Corrosion protection through 2-component protective paint

Accessories

suction tube extension ETLB-S
  • A suction tube extension is used for emptying a shaft or container beyond the immersion depth of the pump
  • For further information please refer to the ETLB-S technical data sheet
  • The suction tube extension is available from 150 mm to 1500 mm in increments of 50 mm in PP and PVDF for all sizes
More informations
suction strainer ETLB-S
  • A suction strainer prevents coarse foreign bodies from entering the pump
  • The suction strainer is available in PP and PVDF for all sizes
More informations
pressure connection bend 90° ETLB-S
  • The pressure connection bend allows the pressure connection (process connection) to be relocated through 90°
  • The pressure connection bend is available in the version union or flange DIN or ANSI. The pressure connection bend is available in the materials PP and PVDF. The union variant is available with an EPDM or FPM seal
More informations
Adapter ETLB-S
  • Replaces the original housing cover of the pump and is required for fitting a suction tube extension and/or suction strainer
  • The adapter is available in the materials PP and PVDF with an EPDM or FPM seal
More informations
flange adapter 180°
  • The flange adapter serves for adapting the pressure connection (process connection) of the pump to a flange connection
  • It is available in the sizes ETLB-S 40-125 to 80-200, for smaller sizes it is necessary to use the 90° pressure connection bend
  • Like the 90° pressure connection bend, the 180° flange adapter is available in PP and PVDF with DIN or ANSI flanges
More informations
Contact